Remko RM Series Instrukcja Użytkownika

Edition GB – T05REMKO RMRM 226, RM 235, RM 252, RM 268, RM 326, RM 335, RM 426, RM 435Wall-mounted split design air conditioning unitOperation · Tech

▲/▼ ButtonsThe▼ button is used to reduce the target temperature, the ▲ button increases it. In automatic mode the temperature can be increased or decr

HEATING modeThis mode is not supported.In dehumidifying mode, the room temperature is reduced to 24°C. The low refrigerant temperature causes the air

TIMER ButtonsThese buttons are used to program the switch-on and switch-off times. Pressing the Timer On and Timer Off buttons activates the timer and

The air outlet side includes individually adjustable fins to control the horizontal air distribution.Manual air distributionInterior moving parts, e.g.

Maintenance It is recommended that you take out a maintenance contract with an annual service from an appropriate specialist firm. Cleaning the conden

The suction pipeand / or liquid separator in the compressor have iced upHeating output increasesIs the outdoor component running continuously?Reduce t

Error indicated by flashing codeInstallation instructions for qualified personnel Transport the unit in its original packaging as close as possible to

Selecting the installation locationIndoor unitThe indoor unit is designed for horizontal wall-mounting above doors. It can also be fitted high up on wa

2001201500120120Installation inside buildings Ensure there is adequate heat dissipation when placing the outdoor component in cellars, attics, adjoin

Connection options1 Exit on wall, right2 Exit through wall, right3 Exit through wall, left4 Exit on wall, left1234Connection options for indoor un

Supplementary installation notes  The connections to the refrigerant pipes may differ when combining the outdoor component with certain indoor units.

All electrical installation work should be performed by specialist contractors. Isolate the voltage supply when connecting the electrical terminals.

Connecting the indoor unitMake the connection as follows:1. Open the air inlet guard.2. Unfasten the cover on the right side and at the bottom right

Electrical connection diagramRM 326 / RM 335Indoor unit Circuit BOutdoor component Circuit BIndoor unit Circuit COutdoor component Circuit CIndoor uni

Electrical circuit diagramRM 226 AT / RM 235 ATColour code A = BrownB = BlueC = BlackO = OrangeGr = GreyR = RedW = WhiteG/Y = Green/yel

Colour code A = BrownB = BlueC = BlackO = OrangeGr = GreyR = RedW = WhiteG/Y = Green/yellowRM 426 AT / RM 435 ATMains cableTo indoor un

Colour codeWH = whiteBU = blueBR = brownBK = blackRM 226 IT to RM 435 IT312LNAC-NFMSMAC-LCOMPDisplayReceiver boardVaporiser sensorAir circulat

Add refrigerantThe equipment contains a basic quantity of refrigerant. Extra refrigerant must be added if the basic length of the refrigerant pipes ex

Commissioning NOTECommissioning should only be performed and documented by specially trained personnel.The system can be commissioned once all th

Check that the stop valves and valve caps are tight after carrying out any work on the refrigerant circuit. If necessary, use appropriate sealant prod

ContentsCarefully read this operating manual prior to commissioning or using the equipment!This manual is an integral part of the unit and must be s

We reserve the right to modify the dimensions and constructional design as part of the ongoing technical development process.Unit dimensionsAll values

Exploded view RM 226 IT to RM 435 ITWe reserve the right to modify the dimensions and constructional design as part of the ongoing technical developme

Spare parts listWhen ordering spare parts, please state the computerised part no., unit number and type (see identification plate) !No. Designation RM

When ordering spare parts, please state the computerised part no., unit number and type (see identification plate) !33Spare parts listNo. Designation R

REMKO RM34Technical dataSeries RM 226 RM 235 RM 252 RM 268Operating mode Multisplit wall-mounted air-conditioning combinations for coolingNominal coo

35Series RM 326 RM 335 RM 426 RM 435Operating mode Multisplit wall-mounted air-conditioning combinations for coolingNominal cooling output1)kW2 x 2.6

Subject to technical modifications, no responsibility taken for the correctness of information!ConsultancyIntensive training means our consultants are

Safety notesDisposal of packagingAll products are carefully packaged using environmentally friendly materials prior to transportation. Make a valuable

The equipment was shipped in sturdy packaging. Immediately check the equipment on delivery and make a note of any damage or missing parts on the deliv

Outdoor unitIndoor area COutdoor areaStop valvesLiquefier fanIndoor area AIndoor area DIndoor area BIndoor unit CIndoor unit AIndoor unit DIndoor unit

Display on indoor unitThe display is lit according to the settings. The display is lit during operation, the selected mode and actual temperature are

"TIMER OFF" Button Press this button to set an automatic equipment switch-off time in the next 24 hours. "HR" Button Press th

A flashing dot on the remote control indicates that the remote control is ready for operation.Remote control ready for operationRESET ButtonPressing th